Garmin GPS 400 - Manual (Page 74)

GPS 400 Pilot’s Guide and Reference 190-00140-60 Rev. H 4-14
SECTION 4
FLIGHT PLANS
Removing an approach, arrival, or
departure from the active flight plan:
1) Select the ‘Remove Approach?’, ‘Remove
Arrival?’, or ‘Remove Departure?’ option from
the Active Flight Plan Page Menu (Figure 4-30)
and press the ENT Key.
Figure 4-30 Active Flight Plan Page Menu
2) A confirmation window appears listing
the procedure to be removed. With ‘Yes?’
highlighted, press the ENT Key.
Determining the closest point along the
active flight plan to a selected waypoint:
1) Select the ‘Closest Point of FPL?’ option from
the Active Flight Plan Page Menu (Figure 4-31)
and press the ENT Key.
Figure 4-31 Active Flight Plan Page Menu
2) A window appears with the reference waypoint
field highlighted. Use the small and large right
knobs to enter the identifier of the reference
waypoint and press the ENT Key.
3) A confirmation window appears for the
selected reference waypoint (Figure 4-32).
Press the ENT Key to accept the waypoint.
Figure 4-32 Closest Point of Flight Plan Window
4) The GPS 400 displays the bearing (BRG) and
distance (DIST) to the closest point along the
flight plan, from the selected reference waypoint.
To create a user waypoint at this location and
add it to the flight plan, highlight ‘Load?’ and
press the ENT Key. The name for the new user
waypoint is derived from the identifier of the
reference waypoint.