Garmin GPS 400 - Manual (Page 110)

GPS 400 Pilot’s Guide and Reference 190-00140-60 Rev. H 6-8
SECTION 6
WPT PAGES
6.5 AIRPORT APPROACH PAGE
The Airport Approach Page (Figure 6-16) shows the
available approach procedures for the selected airport.
Where multiple initial approach fixes (IAFs) and feeder
routes are available, that information may also be
displayed. A map image provides a layout diagram for
each approach and transition.
Figure 6-16 Airport Approach Page
Airport Identifier,
Symbol, and Type
Map Image
Approach
Procedure
Name
Transitions:
IAF’s, Feeder
Routes, and
Vectors-to-Final
Position of Current Page
within Current Page Group
Number of Pages in
Current Page Group
Current
Page Group
Scrolling through the available approaches
and transitions:
1) Press the small right knob to activate the
cursor.
2) Turn the large right knob to place the cursor
on the approach (APR) procedure name field
(Figure 6-16).
3) Turn the small right knob to display a window
of available approaches for the selected airport
(Figure 6-17). Continue turning the small right
knob to select the desired approach.
Figure 6-17 Approach Window
4) Press the ENT Key. The cursor moves to the
transitions (TRANS) field.
5) Turn the small right knob to display a window
of available transitions (Figure 6-18). Continue
turning the small right knob to select the
desired transition or select ‘VECTORS’ for
guidance only along the final course segment
of the approach.
Figure 6-18 Transitions Window
6) Press the ENT Key. To remove the flashing
cursor, press the small right knob.