Garmin GPS 400 - Manual (Page 137)

GPS 400 Pilot’s Guide and Reference 190-00140-60 Rev. H 8-1
SECTION 8
AUX PAGES
SECTION 8: AUX PAGES
8.1 AUX PAGE GROUP
Section 2.1 introduced the GPS 400’s main page
groups (Table 8-1)—NAV, WPT, AUX, NRST—and
described each page in the NAV group. The third page
group (AUX) allows the pilot to change unit settings. The
AUX pages (Figure 8-1) also provide trip planning, fuel
planning, density altitude, true airspeed, and winds aloft
calculations.
Page Groups
NAV Group WPT Group AUX Group NRST Group
see Section 2 see Section 6 4 AUX pages see Section 7
Table 8-1 Page Groups
Figure 8-1 AUX Pages
Flight Planning Utility Setup 1
Setup 2
NOTe: The aUX Page Group may have five aUX
pages available when the GPS 400 installation
includes connection to a weather information
source. See Section 10 of this manual for more
information.
Quickly selecting an AUX page:
1) From any page, press and hold the CLR Key to
select the Default NAV Page (Figure 8-2). If
any of the main pages are already displayed,
this step may be skipped.
Figure 8-2 Default NAV Page
2) Turn the large right knob to select the AUX
Page Group (Figure 8-3). ‘AUX’ appears in the
lower right corner of the screen.
Figure 8-3 Flight Planning Page
3) Turn the small right knob to select the desired
AUX page.