Garmin GPS 400 - Manual (Page 167)

GPS 400 Pilot’s Guide and Reference 190-00140-60 Rev. H 8-31
SECTION 8
AUX PAGES
Abbreviation Data Type
BRG Bearing
CTS Course To Steer
DIS Distance
DTK Desired Track
ESA Enroute Safe Altitude
ETA Estimated Time of Arrival
FLOW Total Fuel Flow
GS Ground Speed
MSA Minimum Safe Altitude
TKE Track Angle Error
TRK Track
VSR Vertical Speed Required
WPT Active Waypoint
XTK Cross Track Error
Table 8-4
Figure 8-79 Select Field Type Window
3) Press the ENT Key to accept the data type.
4) Press the small right knob to remove the cursor
and return to the Setup 2 Page.
Setup 2 Page: Auxiliary Configuration
Configuring the Auxiliary Data Field:
1) Select ‘Data Field Configuration’ from the
Setup 2 Page, using the steps described at the
beginning of this section. Turn the large right
knob to highlight the Auxiliary Configuration
Field (Figure 8-80).
Figure 8-80 AUX CONFIG Field Highlighted
2) Turn the small right knob to select an option
from the Auxiliary Configuration Window
(Figure 8-81).
Figure 8-81 AUX CONFIG Window