Garmin GPS 400 - Manual (Page 162)

GPS 400 Pilot’s Guide and Reference 190-00140-60 Rev. H 8-26
SECTION 8
AUX PAGES
Viewing the map datum:
1) Select ‘Position Format/Map Datum’ from the
Setup 1 Page, using the steps described at the
beginning of this section.
2) The WGS 84 map datum is displayed, this field
cannot be changed.
Figure 8-66 Map Datum WGS 84
Setup 1 Page: Date/Time
Displaying local time or UTC:
1) Select ‘Date/Time’ from the Setup 1 Page, using
the steps described at the beginning of this
section.
2) The flashing cursor highlights the time format
field (Figure 8-67). Turn the small right knob
to display a window of available time formats:
Local 12hr, Local 24hr, or UTC.
Figure 8-67 Time Format Window
3) Continue turning the small right knob to select
the desired time format.
4) Press the ENT Key to accept the selection.