Garmin GPS 72 - Manual (Page 19)

17
Introduction
17
Reference
Saved Tracks — are Track Logs that have been saved in the units memory.
Course Line — controls the display of the Route Line and Go To Line.
Bearing Line — The Bearing Line will show the bearing from your current location to
the active waypoint. This can be used to steer the shortest path to your waypoint.
Setup Map — ‘City’ Tab
The ‘City’ Tab contains the ‘Text’ and ‘Zoom’ settings for Large City, Medium City, Small
City and Small Towns. To change a setting, highlight the fi eld then press ENTER.
Make your selection, then press ENTER to accept.
The City settings are used to de-clutter the map. If ‘Auto’ is the selected ‘Zoom’ set-
ting, the Large and Medium cities will be displayed at a higher Map Zoom Scale setting.
Setup Map — ‘Other’ Tab
The ‘Other’ Tab contains the ‘Text’ and ‘Zoom’ settings for Railroad and an On/Off
setting for the Accuracy Circle. To change a setting, highlight the appropriate fi eld then
press ENTER. Make your new selection, then press ENTER to accept the selection.
Accuracy Circle — The Accuracy Circle is displayed around the current location on the
Map Page. The Accuracy Circle depicts the estimated accuracy of the location.
Heading Line — If the Heading line is ‘On’, a line showing your current heading will be
projected on the map from the current location. The Heading line is a thin black line.
Setup Map — ‘Line’ Tab
Setup Map — ‘City’ Tab
Map Page Options
190-00294-00_0B.indd 17 9/25/2002, 2:37:16 PM