Garmin GPS 72 User Manual
Page 13
11
Introduction
11
Reference
GPS Information Page Options Menu
To activate the Options Menu, from the GPS Information Page press the MENU Key.
To select an option, highlight the desired selection then press ENTER.
Start/Stop Simulator —
This option is used to Start or Stop the Simulator.
Track Up/North Up —
This option determines if the satellites are displayed with North
toward the top of the display or your current track toward the top of the display.
New Elevation —
This option can be used to enter a different elevation. If the GPS has a
2D GPS Location, entering a known elevation can increase the GPS accuracy.
New Location —
If you have moved the unit to another state, province, or country, and
you are having trouble locking onto satellite signals select ‘New Location’.
When you select ‘New Location’, an options menu will be displayed. This menu
contains the options ‘Automatic’ or ‘Use Map’. If you select ‘Automatic’, the unit will
switch to AutoLocate and begin searching for satellites. This method can take up to fi ve
minutes for the unit to begin navigation.
If you select ‘Use Map’, you can use the Pointer on the Map Page to select your
approximate location and the unit will continue to acquire satellites normally using the
almanac for satellite reference. Using this method, the unit does not need to reinitialize
and should receive satellite signals quickly.
If the unit is in the ‘Simulator’ mode, the ‘Use Map’ feature will allow you to move the
simulated current location.
GPS Information Page Options
GPS Information Page
190-00294-00_0B.indd 11
9/25/2002, 2:37:14 PM