Garmin GPS 72 User Manual
Page 18
16
Introduction
16
Reference
Active Route Waypoint —
This option sets the display parameters for waypoints that are
in an Active Route. As an example, if you have selected ‘Small’ as the text option for all
waypoints, but selected ‘Large’ as the setting for Active Route Waypoints, the waypoints
included in an Active Route will be displayed with large text on the Map Page.
Setup Map — ‘Point’ Tab
The ‘Point’ Tab contains the Navaids, Points of Interest, Geo and Exit option settings.
Each of the options has a ‘Text’ and ‘Zoom’ setting. To change a setting, highlight the
appropriate fi eld then press ENTER. Make your new selection, then press ENTER to
accept the selection.
Navaids —
are items displayed on the Map that aid navigation. Navaids can be land-
marks, milemarkers, hazards, light houses, buoys, etc.
Points of Interest —
include general business listings such as restaurants, hotels, gas
stations, etc. Points of Interest are only available if MapSource data has been loaded in
the unit.
Geo —
include points such as schools, cemeteries, churches, towers, glaciers, parks, etc.
Geo data is only available if MapSource data has been loaded in the unit.
Exit —
information about exits that exist in MapSource data.
Setup Map — ‘Line’ Tab
The ‘Line’ Tab contains the ‘Zoom’ scale settings for Track Log, Saved Tracks, Active
Route, and an ‘Off/On setting for the Bearing Line. To change a setting, highlight the
appropriate fi eld then press ENTER. Make your new selection, then press ENTER to
accept the selection.
Track Log —
the Track Log is the bread crumb trail that is left behind as your position
changes on the Map Page.
Setup Map — ‘Waypoint’ Tab
Setup Map — ‘Point’ Tab
Map Page Options
190-00294-00_0B.indd 16
9/25/2002, 2:37:16 PM