beautypg.com

Garmin NavTalk GSM User Manual

Page 65

background image

55

Section 3

Phone Settings

Phone Operation

General Settings

Key Beeps - Allows you turn On a beep to indicate when a key has
been pressed, or use DTMF tones. Multiple beeps indicate when a
particular key is pressed that is inappropriate for the function desired.

Or...you can turn Off all key beeps.

To set the Key beeps:

1. Use the ARROW key to highlight the fi eld, then press ENTER
to display the ON/OFF menu.

2. Use the ARROW key to highlight your choice and then press ENTER.

Message Beeps - Allows the NavTalk to beep when a message con-
cerning unit operation is displayed.

Voice Navigation Prompts - Allows you to turn On or Off navigation
voice prompts when using the Auto-Routing feature for notification of
turns or events in a route.

Auto Answer - Allows you to select and activate the Auto-Answer
feature. Auto-Answer automatically connects the call without the need
to manually press a key to answer an incoming call. This is of particular
convenience when using the NavTalk Hands-Free Kit.

Auto Redial - This feature allows you to redial a number you are

attempting to call when there is no answer during the initial call. The
unit will automatically redial the number up to 7 times.

To turn On/Off the above mentioned features:

1. Use the ARROW key to highlight the desired feature and then press

ENTER to place or remove the check mark from the adjacent box. A

check mark indicates that the feature is active.

Message Beeps,
Voice Navigation
Prompts,
Auto-Answer, and
Auto Redial
On/Off
check boxes.

Message Beeps
Options Menu

General Settings Tab

NOTE: When an Auto-Redial number has been redialled repeatedly
without connecting, the unit assumes that the number is not in
service and places it on a blacklist. If you attempt to dial a number
that has been placed on the blacklist, a message will appear to
indicate that the number is on the blacklist and cannot be dialed.

Another message will appear when the list is full. The list resets
itself each time the unit is turned On.

NvTlkGSMManual copy.indd 55

12/2/2002, 8:42:43 AM