Garmin NavTalk GSM - Manual (Page 118)

108
UTC Offset Chart
This chart is provided to help you determine the time offset settings
for your current location if it is not in one of the time zones listed on the
Time Setup Page. To change the UTC Offset, if necessary, press the MENU
key twice to access the Main Menu. Then scroll across to the Settings Tab,
scroll down to the ‘Systems’ option and press the ENTER key to access the
System tabs and then tab over to the ‘Time’ tab. Highlight the Time Zone
field and highlight Time Zone field and press the ENTER to display the list
of time zones. If the desired zone is not displayed, select ‘Other’ and press
the ENTER key to enter the appropriate offset value from the chart below.
To determine your longitudinal zone, press and hold the ENTER key and
observe the longitude value in the Mark Waypoint Location field. It should
fall within the sets of values on the chart. Press the CLEAR key to avoid
marking a waypoint.
Longitudinal Zone Offset
W180.0° to W172.5°
-12.00
W172.5° to W157.5° -11.00
W157.5° to W142.5° -10.00
W142.5° to W127.5° -09.00
W127.5° to W112.5° -08.00
W112.5° to W097.5° -07.00
W097.5° to W082.5° -06.00
W082.5° to W067.5° -05.00
W067.5° to W052.5° -04.00
W052.5° to W037.5° -03.00
W037.5° to W022.5° -02.00
W022.5° to W007.5° -01.00
W007.5° to E007.5° -00.00
Longitudinal Zone Offset
E007.5° to E022.5° +01.00
E022.5° to E037.5° +02.00
E052.5° to E067.5° +03.00
E067.5° to E082.5°
+04.00
E082.5° to E097.5° +05.00
E097.5° to E112.5° +06.00
E112.5° to E122.5° +07.00
E122.5° to E127.5° +08.00
E127.5° to E142.5° +09.00
E142.5° to E157.5° +10.00
E157.5° to E172.5° +11.00
E172.5° to E180.5° +12.00
Appendix E
Section 6
NvTlkGSMManual copy.indd 108 12/2/2002, 8:43:45 AM