Garmin NavTalk GSM - Manual (Page 46)

36
Section 3
Phone Operation
Air Time History
Call Cost
Call History
Received Calls
To view Received Calls
1. Highlight Call History and press ENTER to display the ‘Received Calls’ list.
2. Use the Up/Down ARROW keys to scroll through the list. Each entry
lists the phone number, name of individual called (if listed in the
Phone Book or CLIP is available), the time and date the call was made.
3. To redial a highlighted entry, press ENTER to display the Call Options
Menu. You can choose from Call, Send Message, Save (or Edit) To
Phonebook, Add To Speed Dial, or Delete options. Highlight an option
and
press ENTER to display the option page or complete the task.
Air Time
To view Air Time
1. Highlight Call History and then press ENTER to display the ‘Call History’
tabs. Highlight ‘Air Time’ and press ENTER.
2. Observe two time fi elds, one for the ‘Last Call’ and ‘All Calls Since’ the
last time you cleared the time entries, and Total Minutes.
3. Use the Up/Down ARROW key to highlight the on-screen ‘Clear’ button
to reset the ‘All Calls Since’ fi eld.
Call Cost
To view Call Cost
1. Highlight Call History and then press ENTER to display the ‘Call History’
tabs. Highlight ‘Call Cost’ and press ENTER to display the Call Cost Page.
2. Observe the Accumulated Charge Meter (ACM) fi elds on this page to
determine the units for the last call made, total units to date, and if
you are approaching your pre-set maximum call units limit. Before
clearing the accumulated units fi elds or setting a call unit limit, you
must fi rst enter your PIN 2 code.
Received Calls
Call Entry Options
Menu
Received Calls Page
Options Menu
Highlight the Clear
Button and press
ENTER to reset the
‘Last Call’ and ‘All
Enter Since’ data
fi elds.
Before you can clear
the Last Call and
Total Call Units fi elds
or set the Maximum
Call Units allowed,
you must enter your
PIN 2 code.
NvTlkGSMManual copy.indd 36 12/2/2002, 8:42:23 AM