Instrument panel indicators, 2011 mdx – Acura 2011 MDX User Manual
Page 77
Adaptive Cruise Control
(ACC) Indicator
On models with adaptive cruise control
(ACC)
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position.
When you push the MAIN button on
the steering wheel, this indicator
comes on green. You will also see
‘‘ACC’’ on the multi-information
display.
If the indicator comes on amber,
there is a problem with the ACC
system. You will also see a
‘‘CHECK
ACC SYSTEM
’’ message on the
multi-information display (see page
). Take your vehicle to your dealer
to have it checked. For more
information, see page
Cruise Main Indicator
On models without adaptive cruise
control (ACC)
This indicator comes on when you
turn on the cruise control system by
pressing the CRUISE button (see
page
).
Cruise Control Indicator
On models without adaptive cruise
control (ACC)
This indicator comes on when you
set the cruise control. See page
for information on operating the
cruise control.
Collision Mitigation
Braking System
™
(CMBS
™) Indicator
On models with collision mitigation
braking system
™(CMBS™)
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. It also comes on as a
reminder that you have turned off the
collision mitigation braking system
™
(CMBS
™).
The CMBS indicator also comes on if
dirt or other debris blocks the radar
sensor in the front grille. You will
also see a
‘‘CHECK CMBS RADAR
SENSOR
’’ message on the multi-
information display. When you clean
the radar sensor, the indicator
should go off the next time you turn
the ignition switch to the ON (II)
position.
CONTINUED
Instrument Panel Indicators
73
Instruments
and
Controls
10/06/29 11:59:04 11 ACURA MDX MMC North America Owner's M 50 31STX640 enu
2011 MDX