Acura 2011 MDX - Manual (Page 151)

Recalling a Memorized Driving
Position
When you unlock the driver's door
with your remote, each remote
activates the keyless memory
settings related to that remote. The
driver's ID (DRIVER 1 or DRIVER 2)
is shown on the back of each remote.
Here are the settings activated with
the remote:
● Customized settings
(see page
89 ).
● Driving position memory
(see page
166 ).
●
Audio system settings
(see page
209 ).
●
Climate control settings
(see page
181 ).
When you unlock and open the
driver's door with the remote
transmitter, the driver's seat (except
the power lumbar feature) and
outside mirrors start to move to the
positions stored in memory. The
indicator in the related memory
button to the remote comes on.
The steering wheel will move to the
stored position when you insert the
key into the ignition switch.
You will also see the ‘‘WELCOME
DRIVER 1 ’’ or ‘‘WELCOME DRIVER
2 ’’ message on the multi-information
display, depending on which linked
remote transmitter is used.
Remote Transmitter
147
Instruments
and
Controls
10/06/29 11:59:04 11 ACURA MDX MMC North America Owner's M 50 31STX640 enu
2011 MDX