beautypg.com

Changing a flat tire, 2011 mdx – Acura 2011 MDX User Manual

Page 553

background image

16. Put on the spare tire. Put the

wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against the
hub. Do not try to tighten the
wheel nuts fully.

17. Lower the vehicle to the ground,

and remove the jack.

18. Tighten the wheel nuts securely in

the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.

Tighten the wheel nuts to:
94 lbf·ft (127 N·m, 13 kgf·m)

19. Remove the center cap from the

flat tire.

20. Place the flat tire face up under the

hoist.

21. Insert the hoist bracket into the

center hole of the flat tire.

CONTINUED

Changing a Flat Tire

549

Taking

Care

of
the

Unexpected

10/06/29 11:59:04 11 ACURA MDX MMC North America Owner's M 50 31STX640 enu

2011 MDX

This manual is related to the following products: