Acura 2011 MDX - Manual (Page 465)

CMBS OFF Button
To switch the CMBS off, press the
CMBS OFF button on the dashboard
for about 1 second. When you do
this, a beeper sounds, a CMBS
indicator on the instrument panel
comes on, and a CMBS OFF
message appears on the multi-
information display. To switch the
system back on, press the button
again for about 1 second.
When you turn the ignition switch to
the ON (II) position, the CMBS will
be in the previously selected on or Automatic Shut Off
Any of the conditions below can
cause the CMBS to shut off. When
the system shuts off, the CMBS
indicator in the instrument panel
comes on, and a CHECK CMBS
SYSTEM message appears on the
multi-information display for about
●
An abnormal tire condition is
detected (wrong tire size, flat
● Extended off-road or mountainous
driving.
● Driving your vehicle with the
parking brake applied.
● Driving your vehicle in bad
weather (rain, fog, snow, etc.).
●
A dirty radar sensor cover on the
front grille.
CMBS OFF BUTTON
CONTINUED
Collision Mitigation Braking System
™ (CMBS™)
461
Driving
10/06/29 11:59:04 11 ACURA MDX MMC North America Owner's M 50 31STX640 enu
tire, etc.).
5 seconds.
off setting.
2011 MDX