Acura 2011 MDX - Manual (Page 126)

Wiper Setup
Here is one custom setting for the
wiper setup:
● WIPER ACTION
While ‘‘WIPER SETUP’’ is shown,
press the SEL/RESET button to
enter the customize mode.
Each time you press the INFO
( / ) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button until you see the
setting you want to customize, then
press the SEL/RESET button to
enter your selection.
Wiper Action
You can select from these two
settings when the wiper switch is in
the INT (intermittent) position:
INTERMITTENT － The
intermittent operation varies
according to the selection you make
on the wiper lever's intermittent
control ring.
WITH VEH SPD － The intermittent
operation varies according to vehicle
speed.
INFO ( ▲/▼)
BUTTON
SEL/RESET
BUTTON
Multi-Information Display
122
10/06/29 11:59:04 11 ACURA MDX MMC North America Owner's M 50 31STX640 enu
2011 MDX