Acura 2013 MDX - Manual (Page 73)

The instrument panel has many
indicators to give you important
information about your vehicle. Seat Belt
Reminder Indicator
This indicator comes on when you
turn the ignition switch to the ON
(II) position. It reminds you and your
passengers to fasten your seat belts.
A beeper also sounds if you have not
fastened your seat belt.
If you turn the ignition switch to the
ON (II) position before fastening
your seat belts, the beeper sounds,
and the indicator flashes. If you do
not fasten your seat belts before the
beeper stops, the indicator stops
flashing but remains on.
If your front passenger does not
fasten their seat belt, the indicator
comes on about 6 seconds after the
ignition switch is turned to the ON
(II) position.
If either of you do not fasten your
seat belt while driving, the beeper
will sound and the indicator will flash
again at regular intervals, and you
will see a
‘‘FASTEN SEAT BELT’’ or
‘‘FASTEN PASSENGER SEAT
BELT ’’ message on the multi-
information display (see page 87 ).
For more information, see page 21 .
Instrument Panel Indicators
68
12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu
2013 MDX
Instruments
and
Controls