Changing a flat tire – Acura 2013 MDX User Manual
Page 556
If you have a flat tire while driving,
stop in a safe place to change it.
Drive slowly along the shoulder until
you get to an exit or an area to stop
that is far away from the traffic lanes.
The vehicle can easily roll off
the jack, seriously injuring
anyone underneath.
Follow the directions for
changing a tire exactly, and
never get under the vehicle
when it is supported only by the
jack.
1. Park the vehicle on firm, level, and
non-slippery ground. Put the
transmission in Park. Apply the
parking brake.
2. Turn on the hazard warning lights,
and turn the ignition switch to the
LOCK (0) position. Have all
passengers get out of the vehicle
while you change the tire.
3. Open the tailgate.
4. Push the rear edge of the
handle to raise the handle loop
and pull up the loop to raise the
cargo area floor.
CARGO AREA
FLOOR
TOOLS
SPARE TIRE
JACK
CONTINUED
Changing a Flat Tire
551
12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu
2013 MDX
Taking
Care
of
the
Unexpected