Acura 2013 MDX - Manual (Page 532)

Headlight Aiming
The headlights were properly
aimed when your vehicle was
new. If you regularly carry heavy
items in the cargo area or pull a
trailer, readjustment may be
required. Adjustments should be
done by your dealer or another
qualified technician.
Low Beam Headlight
Bulb Replacement
The low beam headlight bulbs are
a type of high voltage discharge
tube. High voltage can remain in
the circuit even with the light
switch off and the key removed.
Because of this, you should not
attempt to examine or change a
low beam headlight bulb yourself.
If a low beam headlight bulb fails,
take the vehicle to your dealer to
have it replaced.
Replacing a High
Beam Headlight Bulb
Your vehicle has halogen headlight
bulbs. When replacing a bulb,
handle it by its base, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and
a clean cloth.
Halogen headlight bulbs get very hot
when lit. Oil, perspiration, or a scratch
on the glass can cause the bulb to
overheat and shatter.
1. Open the hood.
2. Remove the front bulkhead cover
(see page 516 ).
(Passenger's side)
Remove the power steering reserve
tank from the stay brackets.
STAY BRACKETS
POWER STEERING FLUID
CONTINUED
Lights
527
12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu
2013 MDX
Maintenance