Acura 2013 MDX - Manual (Page 103)

Adaptive Cruise
Control Display Speed Unit
To change the unit of measurement
from mph to km/h, follow these
instructions:
Select this item from ‘‘ACC SETUP’’
by pressing the INFO ( / ) button
repeatedly until
‘‘ACC DISPLAY
SPEED UNIT ’’ is displayed.
Press the SEL/RESET button to
display the selections. The
highlighted unit, mph or km/h, is
the current setting. To change the
setting, press the INFO ( / )
button until the unit you want is
highlighted, then press the SEL/
RESET button. When your selection is successfully
completed, the display changes as
shown above, and then returns to the
customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, return to ‘‘ACC
DISPLAY SPEED UNIT ’’ and repeat
the procedure again.
Multi-Information Display
98
12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu
2013 MDX
Instruments
and
Controls