Acura 2013 MDX - Manual (Page 449)

If the malfunction indicator lamp
comes on along with the
‘‘D’’
indicator, there is a problem with the
automatic transmission control
system. Avoid rapid acceleration, and
have the transmission checked by
your dealer as soon as possible.
When the ‘‘D’’ indicator warns of a
possible problem with the
transmission, you will see a
‘‘CHECK TRANSMISSION’’
message on the multi-information
display (see page
88 ).
Shifting
To shift from Park to any position,
press firmly on the brake pedal,
and press the release button on
the front of the shift lever, then
move the lever. You cannot shift
out of Park when the ignition
switch is in the LOCK (0) or
ACCESSORY (I) position.
To shift from: Do this:
P to R
Press the brake pedal, and
press the shift lever release
button.
R to P
N to R
D to S
Press the shift lever release
button.
S to D
D to N
N to D
R to N
Move the shift lever.
Park (P) － This position
mechanically locks the transmission.
Use Park whenever you are turning
off or starting the engine. To shift out
of Park, you must press on the brake
pedal and press the release button on
the shift lever. Make sure your foot is
off the accelerator pedal.
If you have done all of the above and
still cannot move the lever out of
Park, see Shift Lock Release on
page
446 .
Automatic Transmission
444
12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu
2013 MDX
Driving