Acura 2013 MDX - Manual (Page 152)

3. Place a cloth on the edge of the
keypad to prevent scratches, and
remove the upper half by carefully
prying on the edge with a small
flat-tip screwdriver.
4. Remove the old battery and note
the polarity. Make sure the
polarity of the new battery is the
same (
－ side facing up), then
insert it in the keypad.
An improperly disposed of battery
can hurt the environment.
Always confirm local regulations
for battery disposal.
5. Snap the two halves of the keypad,
then install the parts in reverse
order.
This device complies with the
appropriate requirements or the
required standards. See page
592 for
more information.
BATTERY
CONTINUED
Remote Transmitter
147
12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu
2013 MDX
Instruments
and
Controls