Acura 2013 MDX - Manual (Page 458)

If the SH-AWD indicator blinks
while driving, it indicates the
differential temperature is too high.
You will also see an
‘‘SH-AWD DIFF
TEMP. HIGH ’’ message on the
multi- information display. If this
happens, pull to the side of the road
when it is safe, shift to Park, and let
the engine idle until the indicator
goes out. If the indicator does not
go out, take your vehicle to a dealer
to have it checked.
If the SH-AWD indicator on the
instrument panel stays on, and the
‘‘CHECK SH-AWD SYSTEM’’
message also appears on the multi-
information display, there is problem
with the SH-AWD system.
Your vehicle still has normal front-
wheel drive with vehicle stability
assist (VSA), but does not have the
advantages of SH-AWD. Have your
vehicle checked by a dealer as soon
as possible.
Super Handling-All Wheel Drive
™ (SH-AWD
® ) System
453
12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu
2013 MDX
Driving