Acura 2013 MDX - Manual (Page 109)

Elapsed Time Reset
There are four elapsed time reset
choices you can make:
MANUAL ONLY － You can reset
the elapsed time, when Trip
Computer's Elapsed Time is
displayed (see page 85).
IGN OFF － The elapsed time is
reset when you turn the ignition
switch to the LOCK (0) position.
TRIP A － The elapsed time is reset
when the Trip A is reset.
TRIP B － The elapsed time is reset
when the Trip B is reset.
You can choose this customizable
item from
‘‘METER SETUP’’ by
pressing the INFO ( / ) button
repeatedly.
Press the SEL/RESET button to see
the selections.
Select the desired setting by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
Multi-Information Display
104
12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu
2013 MDX
Instruments
and
Controls