Acura 2013 MDX - Manual (Page 385)

To select either a ring tone or a
prompt as the incoming call
notification
ᤳ :
Press and release the HFL Talk
button before a command.
1. Say ‘‘System setup.’’
2. Say ‘‘Call notification’’ after the
prompts.
3. Follow the HFL prompts and say
‘‘Ring tone’’ or ‘‘Prompt.’’ You can
also say ‘‘Off’’ for no audible
incoming call notification.
ᤳ : The default setting is a ring tone.
To activate or deactivate the auto
transfer function:
If you get into the vehicle while you
are on the phone, the call can be
automatically transferred to HFL
with the ignition switch in the
ACCESSORY (I) or ON (II) position.
Press and release the HFL Talk
button before a command.
1. Say ‘‘System setup.’’
2. Say ‘‘Auto transfer’’ after the
prompts.
3. HFL will let you know if auto
transfer is on or off,
depending on the previous
setting. Follow the HFL prompts
to change the setting.
To clear the system:
This operation clears the passcodes,
paired phones, and all names in the
HFL phonebook data.
Press and release the HFL Talk
button before a command.
1. Say ‘‘System setup.’’
2. Say ‘‘Clear’’ after the prompts.
3. Follow the HFL prompts to
continue to complete the
clearing procedure.
You can also clear the system when
you have forgotten the passcode and
cannot access HFL. When HFL asks
you for the passcode, say
‘‘System
clear. ’’ Paired phones, all names in
the HFL phonebook data will be lost.
Bluetooth ® HandsFreeLink ® (Models without navigation system)
380
12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu
2013 MDX
Features