Fpc 7160 – Acnodes FPC 7160 User Manual

Page 80

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 7160

15.6” Industrial Panel PC

Emulation Type [Auto]

Use the Emulation Type BIOS option to specify the type of emulation BIOS has to pro-
vide for the USB device.

Auto DEFAULT

BIOS auto-detects the current USB.

Floppy

The USB device will be emulated as a floppy drive. The device can be either A: or B:
responding to INT13h calls that return DL = 0 or DL = 1respectively.

Forced FDD

Allows a hard disk image to be connected as a floppy image. This option works
only for drives formatted with FAT12, FAT16 or FAT32.

Hard Disk

Allows the USB device to be emulated as hard disk responding to INT13h calls that
return DL values of 80h or above.

CDROM

Assumes the CD-ROM is formatted as bootable media. All the devices that sup-
port block sizes greater than 512 bytes can only be booted using this option.

5.4 PCI/PnP

Use the PCI/PnP menu (BIOS Menu 13) to configure advanced PCI and PnP settings.

WARNING:
Setting wrong values for the BIOS selections in the PCIPnP BIOS menu may cause the system to malfunc-
tion.