Fpc 7160 – Acnodes FPC 7160 User Manual

Page 75

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 7160

15.6” Industrial Panel PC

Remote Access [Disabled]

Use the Remote Access option to enable or disable access to the remote functionalities of the system.

Disabled

DEFAULT

Remote access is disabled.

Enabled

Remote access configuration options shown below appear:

-Serial Port Number
-Serial Port Mode
-Flow Control
-Redirection after BIOS POST
-Terminal Type
-VT-UTF8 Combo Key Support

These configuration options are discussed below.

Serial Port Number [COM1]

Use the Serial Port Number option allows to select the serial port used for remote access.

COM1 DEFAULT

System is remotely accessed through COM1

COM2

System is remotely accessed through COM2

NOTE: Make sure the selected COM port is enabled through the Super I/O configuration menu.