Fpc 7160 – Acnodes FPC 7160 User Manual

Page 116

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 7160

15.6” Industrial Panel PC

system32>diskpart

DISKPART>list vol

DISKPART>sel disk 0

DISKPART>create part pri size=

DISKPART>assign letter=N

DISKPART>exit

system32>format N: /fs:ntfs /q /v:Recovery /y system32>exit

Step 4: Build-up recovery partition. Press any key to boot from the recovery CD. It will take a while to
launch the recovery tool. Please be patient. When the recovery tool setup menu appears, type <3> and
press (Figure B-23). The Symantec Ghost window appears and starts configuring the system
to build-up a recovery partition. After completing the system configuration, press any key to reboot the
system. Eject the recovery CD.

Step 5: Access the recovery tool main menu by modifying the "menu.lst". To first access the recovery
tool main menu, the menu.lst must be modified. In Linux system, enter Administrator (root). When
prompt appears, type:

cd /boot/grub vi menu.lst

Step 6: Modify the menu.lst as shown below. Type:

title Recovery Partition

root (hd0,2)

makeactive

chainloader +1

Step 7: The recovery tool menu appears. (Figure B-25)

Step 8: Create a factory default image. Follow Step 2 ~ Step 12 described in Section B.2.5 to create
a factory default image.