Fpc 7160, B.2.5 create factory default image – Acnodes FPC 7160 User Manual

Page 110

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 7160

15.6” Industrial Panel PC

Step 6: After completing the system configuration, press any key in the following window to reboot the
system.

Step 7: Eject the recovery CD.

B.2.5 Create Factory Default Image

NOTE:

Before creating the factory default image, please configure the system to a factory default environ-
ment, including driver and application installations.

To create a factory default image, please follow the steps below.

Step 1: Turn on the system. When the following screen displays (Figure B-10), press the key to
access the recovery tool. The message will display for 10 seconds, please press F3 before the sys-
tem boots into the operating system