Fpc 7160, Chapter 2 installation, Warning – Acnodes FPC 7160 User Manual

Page 17

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 7160

15.6” Industrial Panel PC

CHAPTER 2 INSTALLATION

WARNING:

When installing the FPC7160/ FPC7162, make sure to:

-Turn the power off: Chance of electrocution. Turn off the monitor and unplug it from
the power supply.

-Only let certified engineers change the hardware settings: Incorrect settings can
cause irreparable damage to the product.

-Install the monitor with assistance: The product is very heavy and may be damaged
by drops and bumps. Two or more people should install the panel PC.

-Take anti-static precautions: Electrostatic discharge can destroy electrical compo
nents and injure the user. Users must ground themselves using an anti-static wrist
band or similar device.

The installation steps below should be followed in order.

Step 1: Unpack the flat panel PC

Step 2: Check all the required parts are included

Step 3: Install the hard drive

Step 4: Install the CompactFlash® card

Step 5: Mount the flat panel PC

Step 6: Connect peripheral devices to the bottom panel of the flat panel PC

Step 7: Connect the power cable

Step 8: Configure the system