Fpc 7160 – Acnodes FPC 7160 User Manual

Page 74

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 7160

15.6” Industrial Panel PC

Resume on Ring [Disabled]

Use the Resume on Ring BIOS option to enable activity on the RI (ring in) modem line to rouse the system
from a suspend or standby state. That is, the system will be roused by
an incoming call on a modem.

Disabled DEFAULT
Wake event not generated by an incoming call
Enabled
Wake event generated by an incoming call

Resume on Touch Panel [Disabled]

Use the Resume Touch Panel BIOS option to enable activity on the touch panel to rouse the system from a
suspend or standby state. That is, the system will be roused by touching the touch panel.

Disabled

DEFAULT

Wake event not generated by touch panel activity

Enabled

Wake event generated by touch panel activity

RTC Resume [Disabled]

Use the RTC Resume option to specify the time the system should be roused from a suspended state.

Disabled DEFAULT
The real time clock (RTC) cannot generate a wake event
Enabled
If selected, the following appears with values that can be selected:

RTC Alarm Date (Days)
RTC Alarm Time
After setting the alarm, the computer turns itself on
from a suspend state when the alarm goes off.

3.3.6 Remote Access Configuration

Use the Remote Access Configuration menu (BIOS Menu 11) to configure remote access parameters. The
Remote Access Configuration is an AMIBIOS feature and allows a remote host running a terminal program
to display and configure the BIOS settings.