Acnodes PC 6408 - Manual (Page 26)

14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
PC 6408
8” Fanless Panel PC
CHAPTER 3 UNPACKING
3.1 ANTI-STATIC PRECAUTIONS
WARNING!
Failure to take ESD precautions during the installation of the PC5153/ PC5173
may result in permanent damage to the PC5153/ PC5173 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic compo-
nents, including the PC5153/ PC5173. Dry climates are especially susceptible to ESD.
It is critical that the following anti-static precautions are strictly adhered to whenever
handling the PC5153/ PC5173 or any other electrical component.
ƒ Wear an anti-static wristband - Wearing a simple anti-static wristband can help to
prevent ESD from damaging the PC5153/ PC5173.
ƒ Self-grounding - Touch a grounded conducting material before handling and peri
odically while handling the PC5153/ PC5173.
ƒ Use an anti-static pad - When configuring the PC5153/ PC5173, place it on an
antic-static pad to reduce the possibility of ESD damage.
ƒ Only handle the edges of the PC5153/ PC5173 - When handling the PC5153/
PC5173, hold it by its edges.
3.2 UNPACKING PRECAUTIONS
When the PC5153/ PC5173 is unpacked, please do the following:
ƒ Follow the anti-static precautions outlined in Section 3.1.
ƒ Make sure the packing box is facing upwards so the PC5153/ PC5173 does not
fall out of the box.
ƒ Make sure all the components shown in Section 3.3 are present.
3.3 PACKAGE CONTENTS
1 x PC5153/ PC5173
1 x SATA CD-ROM cable
1 x Panel Mount Kit
1 x Wall Mount Kit
1 x Power cord
1 x Screw set