D2. set iscsi aggregation port – Accusys ExaRAID A16U-IS User Manual
Page 24
Accusys A16R/A16U-IS
22
D2. Set iSCSI Aggregation Port
1. Click Aggregate to create aggregation.
2. Select the Assignment Method from the drop-down menu.
3. Enter the IP Address, Network Mask, and Gateway for aggregation
port.
4. Click Enable Jumbo Frame to enable Jumbo frame function.
5. Highlight the ports from the Unbind ISP Port and click
to move them
to the Bind ISP Port.
Note
Jumbo Frame requires all network switches and host devices to be
enabled.