Accusys ExaRAID A16U-IS - Manual (Page 23)

Accusys A16R/A16U-IS
21
D1. Set iSCSI Port
1. Click Hardware Configurations > iSCSI Ports from the Config Mode
menu. The following screen appears.
This page displays iSCSI ports status and allows users to configure all
iSCSI functions.
2. Choose an iSCSI port and click Modify to change port configuration.
3. Enter the IP Address, Network Mask, and Gateway for the port.
4. Click Enable Jumbo Frame to enable Jumbo frame function.
5. Click Apply to complete modify.
Note
Jumbo Frame requires all network switches and host devices to be
enabled.