JVC DLA-X95R - Manual (Page 66)

5 Install the new lamp unit
.
Handle
6
Tighten the screws of the new lamp
unit
0
Tighten the screws with a t screwdriver.
.
7 Attach the lamp cover
0
Insert the two tabs at the top and bottom of the
lamp cover into the unit.
0
Tighten the screws with a t screwdriver.
.
MEMO
Usable lamp life
0
When the lamp is used with “Lamp Power” set to “Low”
, the lamp life on this unit is approximately 4000 hours.
This is the average usable time and not a guaranteed
value.
0
The lamp life may not reach 4000 hours depending on
the operating conditions.
0
When the lamp has reached the end of its usable life,
deterioration progresses rapidly.
0 When the video image appears dark, when the color
tone looks unnatural, or when the image flickers,
replace the lamp unit with a new one promptly.
Purchasing a lamp unit
Please consult your authorized dealer or nearby service
center.
0
Lamp unit
Product no.: PK-L2312U
* Lamps with a different product number or those for other
projector models cannot be used.
Information about the lamp
An ultra-high pressure mercury lamp with a high internal
pressure is used in the projector.
Due to the characteristics of this lamp, it may blow out
with a loud noise or go out when it is subject to shock or
after using for a prolonged period of time (the time before
the lamp blows out or goes out varies considerably with
each lamp as well as the operating conditions).
After replacing the lamp
0 Do not place the removed lamp unit at a place that is
within reach by children or anywhere near
inflammable items.
0
Dispose used lamp units in the same way as
fluorescent lamps. Follow the regulations of your local
community for disposal.
66
Maintenance