JVC DLA-X95R - Manual (Page 26)

Viewing Videos
MEMO
0
When you are using B A, be sure to remove the lens cover.
0
Connect the power cord, and ensure that the “STANDBY/ON” indicator
lights up in red.
1 Turn on the power
Remote control: press the C [ON] button
Projector unit: press the A [STANDBY/ON] button
0
The “STANDBY/ON” indicator light switches from red to green (light
goes off after the unit starts up).
0 (D C) The motorized lens cover opens.
.
LAMP WARNING STANDBY/ON ND TANDBY LAMP WARNING STANDBY/ON ND TANDBY
During lamp startup
“STANDBY/ON” lights up (green)
In standby state
“STANDBY/ON” lights up (red)
2 Choose the image to project
Remote control: press the [INPUT] button ([HDMI 1], [HDMI 2],
[COMP.], [PC] (D C only))
Projector unit: press the [INPUT] button (pressing the button each time
switches the mode)
.
HDMI 1 HDMI 2 COMP. PC ( )
0
Play back the selected device to project the image.
To hide the image temporarily
Press the [HIDE] button on the projector unit or remote control
0
The “STANDBY/ON” indicator light starts to blink in green.
0
Press the [HIDE] button again to resume display of the image.
0
The power cannot be turned off when the image is temporarily
hidden.
LAMP WARNING STANDBY/ON
1
2
3
26
Operate