JVC DLA-X95R - Manual (Page 33)

Adjusting the Screen Size (Aspect)
The screen size of the projected image can be adjusted
optimally according to the original screen size (aspect)
that has been input.
1
Press the [MENU] button to display
the menu
2
Select “Input Signal”"“Aspect
(Video)” or “Aspect (PC)” from the
menu
.
MENU BACK
3D Setting
Auto Progressive
Off Mask
16:9 Aspect (Video)
Picture Position
PC
COMP.
HDMI
Input Signal
Back Operate
Select
Exit
Input Signal Setting Description
Aspect
(Video)
4:3 Sets the screen size to 4:3. For
HD signals, the two sides are
reduced.
16:9 Sets the screen size to 16:9.
For SD signals, the two sides
are expanded.
Zoom Enlarges the entire image.
*Not selectable in the
case of HD signals.
Aspect (PC) Auto Positions the image at the
center with the entire image
enlarged.
Just Displays the input image in the
actual size.
Full Fills the entire screen with the
image with the size (aspect) of
the input image ignored.
0
During 3D signal input, the size is fixed at “16:9”
.
3 Press the [MENU] button to exit
Example of input image and screen size
HDMI input, component video input
.
Zoom 16:9 4:3
4:3
2.35:1
(Cinema
Scope)
Setting
Input Image
Output Image
PC Input
.
1280Ч1024
1920Ч1200
Full Just Auto
Setting Output Image
Input Image
33
Operate