JVC DLA-X95R - Manual (Page 35)

Viewing 3D Movies
1
Connect this unit to a 3D-compatible
HDMI device, and turn on the power
to play back the 3D video image
0
For details on how to play back 3D video images,
please refer to the instruction manual of the
player or recorder in use.
0
When 3D signals are received, the video image
switches automatically to the 3D format.
0 This unit supports the following 3D formats.
- Frame packing
- Side-by-side
- Top-and-bottom
0
In the default setting, “3D Format” is set to “Auto”
for automatic projection of 3D images.
If the image does not switch to 3D automatically
Press the [3D FORMAT] button on the remote
control
.
0
Pressing the [3D FORMAT] button each time
switches the mode in the following sequence:
“Auto”"“Side by Side”"“Top and Bottom”
"
“2D”"“Auto”...
Format Description
Auto The format is detected and
configured automatically.
Side by Side Select this setting if the 3D input
signal is of the side-by-side
format.
Top and Bottom Select this setting if the 3D input
signal is of the top-and-bottom
format.
2D Select this setting if 2D images
are falsely recognized as 3D
ones.
2
Turn of the power of the 3D GLASSES
and put them on
0
The PK-AG1 powers on automatically.
Converting 2D Movies to 3D Movies for Viewing
1
Press the [3D SETTING] button to
display “3D Setting”
.
>
MENU BACK
1
0
0
Input Signal
Back Operate
Select
Exit
Sub Title Adjust
Intensity
Crosstalk Cancel
Parallax
Off
Off
2D to 3D conversion
Auto 3D Format
3D Setting
2
Select “2D to 3D conversion” followed
by “On”, and press the [OK] button
3 Press the [MENU] button to exit
MEMO
0 Depending on the movies, 3D effect may be less than
what you expected.
35
Operate