JVC DLA-X95R - Manual (Page 25)

Connecting to the TRIGGER Terminal
.
Trigger Input Terminal (Ø3.5)
Screen
Trigger Cable (Sold Separately)
To [TRIGGER] Terminal
This Unit
0 Do not use it to supply power to other devices.
0 Connecting to the audio terminal of another device may cause the device to malfunction or break down.
0
Using beyond the rated value will cause the unit to malfunction.
0
The trigger terminal outputs a voltage of 12 V. Exercise adequate caution to prevent short circuit.
0
The factory setting is “Off”. To change the setting, configure the “Trigger” item in the menu (p. 62).
Connecting the Power Cord (Supplied Accessory)
A Connect the power cord supplied to the power input terminal on
the main unit
B Insert the supplied power plug into the wall outlet.
Precautions to prevent fire and electric shock
0
The voltage capacity of this unit is large. Please connect it directly to the wall outlet.
0
When you are not using the equipment, please unplug the power cord from the outlet.
0 Connect it using only the power cord supplied.
0
Do not use a voltage other than the indicated power voltage.
0
Do not damage, break or modify the power cord. Do not place a heavy object on the power cord, or heat or pull it.
Doing so may damage the power cord.
0
Do not unplug the power cord with wet hands.
A
B
Power Cord
(Supplied)
25
Set up