FIAT Idea User Manual

Page 79

SAFETY DEVICES

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

To extend the boot totally

Proceed as follows:
❒ remove the rear parcel and previ-

ously shown;

❒ make sure the headrests are com-

pletely lowered;

❒ use levers D and E-fig. 116 to fold

the rear seat backs on the cushions;

❒ make sure the seats are completely in

backward position by means of han-
dles B or C-fig. 115;

❒ use tapes F and G-fig. 116 to tilt the

seats completely.

IMPORTANT Tilting is only possible with
rear seats positioned completely back-
wards.

The tilted seats are fastened in this posi-
tion by the action of the side struts.

Partial extension

Operating the required part (right or left)
of the seat in the same way it is possible
to obtain partial extension of the boot
fig. 119.

IMPORTANT For rear seat complete tilt-
ing it could be necessary to move the front
seats forward.

fig. 115

F0H0048m

fig. 116

F0H0109m

Never pull tapes B or C-
fig. 115 with seats in load po-

sition as they will slide vertically thus
hindering seat repositioning.

WARNING

fig. 117

F0H0110m

To return the cushions
on the floor

Use tapes B-fig. 117 to return the cush-
ions on the floor.

If the central seat belt is fas-
tened to the seat, release it

before tilting the seat.

WARNING

036-092 idea GB 1 ed 10-07-2008 16:12 Pagina 78