FIAT Idea - Manual (Page 153)

152
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
IF AN INTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating, see
“When needing to change a bulb”.
FRONT CEILING LIGHT fig. 32-33
To change the bulb, proceed as follows:
❒ work in the points shown by the ar-
rows and remove the light unit A;
❒ open the protective cover B;
❒ change the bulbs C releasing them
from the side contacts and making
sure the new bulbs are correctly fas-
tened between the contacts;
❒ close the cover B and fasten the light
unit A in its housing making sure it
clicks into place.
REAR CEILING LIGHT
(where provided) fig. 34-35
To change the bulb, proceed as follows:
❒ work in the points shown by the ar-
rows and remove the light unit D;
❒ open the protective cover E;
❒ change the bulb F releasing it from the
side contacts and making sure the new
bulb is correctly fastened between the
contacts;
❒ close the cover E and fasten the light
unit D in its housing making sure it
clicks into place.
fig. 32 F0H0193m fig. 33 F0H0194m
fig. 34 F0H0195m
BOOT LIGHT fig. 36
To change the bulb, proceed as follows:
❒ open the tailgate;
❒ remove the light unit A levering in the
point shown by the arrow.
❒ open the protective cover B and
change the snap-fitted bulb;
133-160 idea GB 1 ed 10-07-2008 8:30 Pagina 152