FIAT Idea User Manual
Page 150
149
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
Side
To change the bulb, proceed as follows:
❒ lever in the point shown by the arrow
to compress the catch and remove the
unit C-fig. 24;
❒ turn the bulb holder D counter-clock-
wise, remove the snap-fitted bulb and
change it;
❒ refit the bulb holder D in the trans-
parent cover, then position the unit
making sure the catch clicks into place.
fig. 24
F0H0184m
FRONT SIDELIGHTS
To change the bulb, proceed as follows:
❒ remove the protective cover releasing
the relevant catch;
❒ remove the snap-fitted bulb holder A-
fig. 25, extract the bulb B and change
it;
❒ refit the bulb holder A;
❒ refit the protective cover correctly.
FRONT FOG LIGHTS
(where provided)
To change the bulb, proceed as follows:
❒ disconnect the electrical connector C-
fig. 26;
❒ release the bulb catch D;
❒ remove the bulb E and change it;
❒ fit the new bulb, hook the bulb catch
D and re-connect the electrical con-
nector C.
fig. 25
F0H0185m
fig. 26
F0H0186m
133-160 idea GB 1 ed 10-07-2008 8:30 Pagina 149