FIAT Idea User Manual

Page 152

151

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

SAFETY DEVICES

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

The bulbs are arranged inside the light unit
as follows:

D: sidelights / STOP

E: direction indicators

F: reversing light

G: rear fog lights

fig. 29

F0H0189m

fig. 30

F0H0190m

ADDITIONAL BRAKING LIGHT
(THIRD STOP)

To change the bulbs, proceed as follows:
❒ open the tailgate;
❒ slacken the two fastening screws A-

fig. 30;

❒ press the catch B and remove the bulb

holder;

❒ remove the snap-fitted bulbs and

change them;

❒ insert the bulb holder making sure the

catch B clicks into place; drive in the
two fastening screws A.

IMPORTANT Where provided, on ver-
sions with dark windows, replace the
whole light unit since it is sealed.

Number plate light

To change the bulb, proceed as follows:
❒ work in the point shown by the arrow

and remove the transparent A-fig. 31;

❒ change the bulb B releasing it from the

side contacts and making sure the new
bulb is correctly fastened between the
contacts;

❒ refit the transparent.

fig. 31

F0H0192m

133-160 idea GB 1 ed 10-07-2008 8:30 Pagina 151