FIAT Idea User Manual
Page 151
150
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
fig. 27
F0H0187m
fig. 28
F0H0188m
REAR LIGHT UNITS
To change the bulb, proceed as follows:
❒ open the tailgate;
❒ turn the fastener A-fig. 27 counter-
clockwise (for the left lid) or clockwise
(for the right lid) and remove the cov-
er;
❒ disconnect the electrical connector C-
fig. 28;
❒ slacken the two fastening nuts B;
❒ to remove the headlight, pull it in per-
pendicular direction using the handle
on the headlight;
❒ press the bulb holder tabs and remove
it from its housing;
❒ remove bulbs D - E - F - G-fig. 29
lightly pushing them and turning them
counter-clockwise;
❒ refit the bulb holder and make sure
the two tabs are fastened and then
connect the electrical connector C-
fig. 28; drive in the two fastening nuts
B; refit the cover checking that the
tabs are fitted in their seat and turning
the fastener A-fig. 27 counter-clock-
wise (for the left lid) or clockwise (for
the right lid) to hook it.
In the event of a failure (burnt-out bulbs)
on taillights, brake lights will switch on
dimmed automatically in order to guaran-
tee temporary lighting at the back of the
car.
After replacing the burnt-out bulb the tail-
lights will operate regularly.
133-160 idea GB 1 ed 10-07-2008 8:30 Pagina 150