FIAT Idea User Manual

Page 178

177

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

SAFETY DEVICES

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

fig. 14

F0H0217m

fig. 15

F0H0218m

Changing the rear window blade
fig. 15

Proceed as follows:
❒ raise the cover A and remove the arm

from the car, slackening the nut B that
fastens it to the pivot pin;

❒ fit the new arm, positioning it cor-

rectly, and fully tighten the nut;

❒ lower the cover.

SPRAY NOZZLES

Windscreen wiper fig. 16

If the jet of fluid is inadequate, firstly check
that there is fluid in the reservoir: see
“Checking fluid levels” in this section).

Then check that the nozzle holes are not
clogged, if necessary use a needle.

Windscreen nozzles are fluid-dynamic and
do not require adjustment; windscreen flu-
id is atomized to cover a preset glass area.

fig. 16

F0H0219m

fig. 17

F0H0220m

Rear window wiper fig. 17

The rear window nozzle like the wind-
screen nozzle is fluid-dynamic and do not
require adjustment; rear window fluid is
atomized to cover a preset glass area.

The nozzle holder is located at the top of
the tailgate.

161-180 idea GB 1 ed 10-07-2008 8:30 Pagina 177