FIAT Idea User Manual

Page 27

SAFETY DEVICES

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

Speed limit (Speed beep)

This function enables setting of the car
speed limit (km/h or mph). When this lim-
it is exceeded the driver is immediately
alerted (see section “Warning lights and
messages”).

To set the speed limit, proceed as follows:

– briefly press button MODE: the display
will show the wording “Speed Beep”;

– press button + or – to select speed lim-
it activation (On) or deactivation (Off);

– if the function is on, press buttons + or
– to select the required speed limit and
then press MODE to confirm.

To cancel the setting, proceed as follows:

– briefly press button MODE: ON flash-
es on the display;

– press button +: OFF flashes on the dis-
play;

– briefly press button MODE to go back
to the menu screen or press the button
for a prolonged time to go back to the
standard screen without storing the set-
tings.

Note The speed may be set in the range
from 30 to 250 km/h, or from 20 to 155
mph according to the previously chosen
unit (see “Setting the distance unit”) de-
scribed below. The setting will in-
crease/decrease by 5 units each time but-
ton +/– is pressed. Hold button +/–
pressed to increase/decrease the setting
rapidly. Complete the setting by briefly
pressing the button when you approach
the required value.

– briefly press button MODE to go back
to the menu screen or press the button
for a prolonged time to go back to the
standard screen without storing the set-
tings.

001-035 idea GB 1 ed 10-07-2008 8:27 Pagina 26