FIAT Idea - Manual (Page 148)

147
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
IF AN EXTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating, see
“When needing to change a bulb”.
FRONT LIGHT UNITS
The front light units contain the sidelights,
the dipped beam, main beam, direction in-
dicator and fog light bulbs.
To change the bulbs of the sidelights, low
beams, direction indicators and fog lights
it is necessary to remove the cover A-
fig. 18 releasing the catch B.
fig. 18 F0H0179m fig. 19 F0H0180m
The bulbs are arranged inside the light unit
fig. 19 as follows:
G: direction indicators
F: main beam headlights
E: sidelights
D: fog lights
C: dipped beam headlights
After replacement, refit the covers cor-
rectly checking that they are properly se-
cured.
MAIN BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒ turn the cap A-fig. 20 anticlockwise
and remove it;
❒ disconnect the electrical connector B-
fig. 21;
❒ release the bulb catch C-fig. 21;
❒ remove the bulb D-fig. 21 and change
it;
❒ refit the catch C-fig. 21, connect the
electrical connector B and fit the cap
A-fig. 20 turning it clockwise. Put the
cap ventilation outlet H-fig. 20 from
the top downwards.
133-160 idea GB 1 ed 10-07-2008 8:30 Pagina 147