FIAT Idea - Manual (Page 65)

64
SAFETY DEVICES
CORRECT USE OF THE CAR
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
TO REDUCE MEMORISED
SPEED
The speed memorised can be increased in
two ways:
❒ disengaging the device and then
memorising the new speed;
or
❒ moving the stalk downwards (–) until
reaching the new speed which will be
memorised automatically.
Each operation of the stalk will corre-
spond to a slight reduction in speed (about
1 km/h), while keeping the stalk down-
wards continuously will correspond to a
continuous speed reduction.
DEVICE DISENGAGEMENT
Turn the ring A-fig. 78 to OFF or the ig-
nition key to STOP. The device is auto-
matically deactivated also in one of the fol-
lowing cases:
❒ pressing the brake or clutch pedal.
In the event of device mal-
function or failure, turn the
knurled ring A to OFF and contact a
Fiat Dealership after checking the
protective fuse integrity.
WARNING
CEILING LIGHTS
FRONT CEILING LIGHT fig. 79
Press switch A to switch the light on and
off.
With switch A in the central position,
lights C and D turn on/off when the front
doors are opened/closed.
Pressing switch A to the left, lights C and
D stay off.
Pressing switch A to the right, lights C and
D stay on.
fig. 79 F0H0077m
Light switching on/off is progressive.
Switch B turns on the spot light; when the
ceiling light is off, it turns on singularly:
❒ map reading light C if pressed to the
left;
❒ map reading light D if pressed to the
right.
IMPORTANT Make sure that both
switches are in central position before get-
ting out of the car. This will ensure that
the ceiling lights go out when the doors
are closed preventing the battery from
running down.
Anyway, if the switch is left on, the ceil-
ing light will automatically switch off after
15 minutes from the engine turning off.
036-092 idea GB 1 ed 10-07-2008 16:12 Pagina 64