beautypg.com

Cruise control (where provided) – FIAT Idea User Manual

Page 64

background image

63

SAFETY DEVICES

CORRECT USE OF THE CAR

W

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

CRUISE CONTROL
(where provided)

It is a device able to support the driver,
with electronic control, which allows dri-
ving at speed over 30 km/h on long and
straight dry roads (e.g.: motorways), at a
desired speed, without pressing the ac-
celerator pedal. Therefore it is not sug-
gested to use this device on extra-urban
roads with traffic. Do not use it in town.

DEVICE ENGAGEMENT

Turn knurled ring A-fig. 78 to ON.

The device may only be engaged in the 4th
or 5th gear. Travelling downhill with the
device engaged, the car speed may in-
crease more than the memorised one.

When the device is activated, the warning
light Ü on the instrument cluster turns on
together with the message (where pro-
vided) on the reconfigurable multifunction
display.

fig. 78

F0H0074m

TO MEMORISE SPEED

Proceed as follows:
❒ turn the knurled ring A-fig. 78 to

ON and press the accelerator pedal
to the required speed;

❒ move the stalk upwards (+) for at

least three seconds, then release it.
The car speed is memorised and it is
therefore possible to release the
accelerator pedal.

In the case of need (when overtaking for
instance) acceleration is possible simply
pressing the accelerator pedal: releasing
the accelerator pedal, the car will return
to the speed memorised previously.

TO RESET THE MEMORISED
SPEED

If the device has been disengaged for ex-
ample pressing the brake or clutch pedal,
the memorised speed can be reset as fol-
lows:
❒ accelerate gradually until reaching a

speed approaching the one memo-
rised;

❒ engage the gear selected at the time

of speed memorising (4

th

or 5

th

gear);

❒ press the RES button B-fig. 78.

TO INCREASE THE MEMORISED
SPEED

The speed memorised can be increased in
two ways:
❒ pressing the accelerator and then

memorising the new speed reached;

or
❒ moving the stalk upwards (+).
Each operation of the stalk will corre-
spond to a slight increase in speed (about
1 km/h), while keeping the stalk upwards
continuously will correspond to a contin-
uous speed increase.

When travelling with the de-
vice on, do not put the gear-

box lever in neutral.

ATTENZIONE

036-092 idea GB 1 ed 10-07-2008 16:12 Pagina 63