FIAT 500L - Manual (Page 87)

ANTI-PINCH SAFETY DEVICE
The sun blind is provided with an "anti-pinch" safety
device that can detect the presence of any obstacle
during the closing movement (front area and central
crossmember area).
When this occurs the blind interrupts its stroke
immediately.
EMERGENCY OPERATION
If the control button fails, the sun curtain can be
moved manually proceeding as described below:
❒ remove protective cap A fig. 71 on the internal
trim;
❒ take Allen wrench B provided and located in the
tool box or, depending on the version, in the
Fix&Go Automatic container located in the
luggage compartment;
❒ introduce the wrench B provided into housing A
and turn it clockwise to open the curtain or
anticlockwise to close it.
SUN CURTAIN INITIALISATION
PROCEDURE
Following an automatic movement malfunction while
opening/closing or after an emergency manoeuvre
(see description in the previous paragraph), the
automatic operation of the sun curtain must
be initialised again.
Proceed as follows:
❒ press button A in closing position;
❒ hold down button A: after approximately 10
seconds the curtain moves jerkily to closing
position. Once the movement has ended (curtain
closed) release button B;
❒ turn the ignition key to STOP and keep it there for
10 seconds;
❒ turn the ignition key to the MAR-ON position;
❒ press button A in closing position;
❒ hold down button A until the curtain is completely
closed: the initialisation procedure has ended;
❒ press button A again within 3 seconds from the
conclusion of the initialisation procedure;
fig. 71 F0Y0285
83
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX